Welcome to the Rx7 Forum and Owners Club.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

<<<<<< Register to remove these ads >>>>>>


Go Back   Rx7 Forum and Owners Club > General RX-7 Area > Kills Section

Kills Section Post all your road kills here!


Reply
 
Thread Tools Display Modes
Old 07-08-2004, 03:05 AM   #1
marshall
Full Access Member
 
Join Date: May 2004
Location: Dallas, Texas
Posts: 88
Send a message via AIM to marshall
Default C5 Vette gets ripped a new one :)
Usual morning trip to work, and a yellow c5 vette pulls up next to me. Decent sounding exhaust as far as mods go that i could tell. We punch it from 60mph, by 4th gear i had a good 2 1/2 cars on him then i let off in the middle of 4th. He flys around me and follows me until i get to my office. He was cool, he asked me about my car and what not. The best part was the look on his face when i told him it was a 93'

-Marshall


__________________
It's only after you've lost everything that you're free to do anything.
marshall is offline   Reply With Quote
Old 07-08-2004, 06:18 PM   #2
AusTexRex
Full Access Member
 
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
Send a message via AIM to AusTexRex
Default
God bless Marvel.
AusTexRex is offline   Reply With Quote
Old 07-09-2004, 05:37 AM   #3
89t2flynpastu
Junior Member
 
Join Date: Jul 2004
Location: NY
Posts: 16
Send a message via AIM to 89t2flynpastu
Default
hey im jon,im new to this site i just got a 89 turbo 2 basically mint condition all i need is an exhaust nice kill by the way...cant wait to start ripin some kids cars in my school
89t2flynpastu is offline   Reply With Quote
Old 07-09-2004, 07:04 AM   #4
 
Shaggy's Avatar
Shaggy
Administrator
 
Join Date: Feb 2004
Age: 48
Posts: 779
Default
Thanks for joining 89..hope to see your here often!!!


__________________
Shaggy is offline   Reply With Quote
Old 07-11-2004, 06:42 PM   #5
89t2flynpastu
Junior Member
 
Join Date: Jul 2004
Location: NY
Posts: 16
Send a message via AIM to 89t2flynpastu
Default
thanks shaggy...im pissed off tho last nite i lost to a gti cause i need an exhaust, so my turbo doesnt spool to its potential so next week wen i get the racing beat exhaust put on hopefully itll be puttin out to its fullest potential thanks i will be on here like every day
89t2flynpastu is offline   Reply With Quote
Old 07-12-2004, 06:35 PM   #6
marshall
Full Access Member
 
Join Date: May 2004
Location: Dallas, Texas
Posts: 88
Send a message via AIM to marshall
Default
Do you have intake yet? That will help a lot as well.


__________________
It's only after you've lost everything that you're free to do anything.
marshall is offline   Reply With Quote
Old 02-25-2005, 05:16 AM   #7
dRuNk-mEdIc
Full Access Member
 
Join Date: Feb 2005
Location: Cali 949
Posts: 73
Send a message via AIM to dRuNk-mEdIc
Default
Intake , Exhaust , porting , suspension, that would make it facinating to look at and better yet to drive.


__________________
D1.....yep.yep.....crazy ass shit

You can put 20 grand into your honda and its still a honda.

My RX7.....well its an RX7.
dRuNk-mEdIc is offline   Reply With Quote
Old 06-22-2005, 10:27 AM   #8
fc3s
Full Access Member
 
Join Date: Jun 2005
Location: Looking At Your Headlights in My Rearview Mirror
Posts: 52
Default
go with stock intake with k&n insert because if not then you will be paying for a new intake plus a box to keep the enginebay air from getting to you intake. if you dont have a box then sucking that hot air will kill your hp dramatically . also wait to port your car its best to have a fresh engine to do that with and also you get maximum power. here is the best thing to do if you get a engine rebuild kit. Get the RB Lightweight rotors $2200, stat gears frnt $121 rear $138, streetport, with rb headers then anything you want from there back. tokico struts with tenabe 1.5 lowering coils, reprogramed ecu. with this youll be putting out a little mor than 250-260whp with a speed aprox 180+ i have a friend that tears apart transams ws-6 with his rx3. but right now if i were you i would get the k&n insert, with exhaust, ecu, 750cc fuel injectors. with that youll be doin about 155+ you'll beable to play with vettes. all around with this setup it should cost about $1000 and if you go with the rebuild it will be about $6000 for the whole engine setup. but with the suspension i like the tokico non adjustable shocks with the tenabe 1.5 lower coils and for max handling S&W 8 point roll cage that about 170$


__________________
88 N/A
THE GOD'S MADE THE RX7
This is Not My Car (below)
fc3s is offline   Reply With Quote
Old 07-10-2005, 06:25 PM   #9
2ROTORMOTOR
Full Access Member
 
Join Date: Mar 2004
Location: Miami
Posts: 319
Send a message via AIM to 2ROTORMOTOR Send a message via MSN to 2ROTORMOTOR
Default
Originally Posted by fc3s
go with stock intake with k&n insert because if not then you will be paying for a new intake plus a box to keep the enginebay air from getting to you intake. if you dont have a box then sucking that hot air will kill your hp dramatically . also wait to port your car its best to have a fresh engine to do that with and also you get maximum power. here is the best thing to do if you get a engine rebuild kit. Get the RB Lightweight rotors $2200, stat gears frnt $121 rear $138, streetport, with rb headers then anything you want from there back. tokico struts with tenabe 1.5 lowering coils, reprogramed ecu. with this youll be putting out a little mor than 250-260whp with a speed aprox 180+ i have a friend that tears apart transams ws-6 with his rx3. but right now if i were you i would get the k&n insert, with exhaust, ecu, 750cc fuel injectors. with that youll be doin about 155+ you'll beable to play with vettes. all around with this setup it should cost about $1000 and if you go with the rebuild it will be about $6000 for the whole engine setup. but with the suspension i like the tokico non adjustable shocks with the tenabe 1.5 lower coils and for max handling S&W 8 point roll cage that about 170$

Lol I doubt he has enough money to spit out 6 grand for all the shit that you mentioned. Not to mention that it is completely unneccessary. He is turbo, he doesnt need an intake. There is no need for the airbox.

You dont need porting either, I have 477whp with stock ports at 16 psi. Look for now, try to get a FMIC( you will actuaally notice a big difference with this) fcd, and 680 secondaries, if you dont want a fuel controler. O and exhaust..


__________________
2ROTORMOTOR is offline   Reply With Quote
Old 07-10-2005, 10:30 PM   #10
 
black rocket's Avatar
black rocket
Full Access Member
 
Join Date: May 2004
Location: NV
Posts: 1,059
Default
I guess it's just a difference of personal preference.

I don't agree with not needing cold air intake/box..anything to reduce air molecules (colder = smaller) will benefit any vehicle.

At his stage...he may not need porting but, porting will surely would add more ponies under the hood

I'm getting my spare engine half bridgeported next year


__________________
Drive safe and Sane
black rocket is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump