| Welcome to the Rx7 Forum and Owners Club. |
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
<<<<<< Register to remove these ads >>>>>>
|
|
| 2nd Generation 1986-1992 Discussion |
04-06-2005, 01:14 PM
|
#1
|
|
Junior Member
Join Date: Jul 2004
Posts: 6
|
My car starts and then dies
Just today my car, 87 TII, decided that when I try to start it it will shut-off right away.
Spark and fuel pressure are good, placing my foot on the accelarator doesn't seem to change the revs. It starts like normal then just dies...
Has anyone had similar problems?
Where should I look to fix it?
Thanks in advance.
Daniel
|
|
|
|
|
|
04-06-2005, 03:42 PM
|
#2
|
|
Full Access Member
Join Date: May 2004
Location: NV
Posts: 1,059
|
Tell me more in detail that recent events of your ride i.e., worked on your car, racing, any noise?
I don't think fuel cutoff as it doesn't stop immediately, if you've worked on your car you might have loose hose...etc.
|
__________________
Drive safe and Sane
|
|
|
|
|
04-06-2005, 04:33 PM
|
#3
|
|
Full Access Member
Join Date: Sep 2004
Location: Manitoba, Canada
Posts: 194
|
vacuum leak wouldn't just make the car shut on him like that would it?
|
__________________
Turbo lag was created to give V8's a chance.
|
|
|
|
|
04-07-2005, 12:26 AM
|
#4
|
|
Junior Member
Join Date: Jul 2004
Posts: 6
|
It is at the crash repairers, they were fixing my front bumper...
they had no problems starting it until yesterday.
They said they had changed a broken fuse and nothing else.
They've already had an auto-electrician look at it for about an hour... no luck.
|
|
|
|
|
|
|
04-13-2005, 12:31 AM
|
#5
|
|
Full Access Member
Join Date: Apr 2004
Location: Austin & Waco Texas
Posts: 553
|
Sounds like their new fuse may be grounded accidentally. Either that or they knocked the harness to the BAC loose.
|
|
|
|
|
|
|
05-31-2011, 05:17 AM
|
#6
|
|
Junior Member
Join Date: May 2011
Age: 36
Posts: 1
|
Changing the spark plug may not be the immediate solution for that. Are you confident enough that the new spark plug is compatible with the cylinder where it was placed?
Spark plugs are auto parts that is responsible for the ignition of the engine. Whenever these spark plugs are not compatible with the cylinder, they wouldn't last resulting to a bad saprk plug.
|
|
|
|
|
|
|
05-31-2011, 06:06 PM
|
#7
|
|
Full Access Member
Join Date: Sep 2010
Location: Fredericksburg, Va
Age: 44
Posts: 785
|
I'm going to give you the benefit of a doubt okay, but you seem to be spamming. Please don't link things like that auto parts site again.
No on behalf of your post.
1. This post has been inactive for over 5 years, so I'm willing to bet the problem has been resolved if he even owns the car.
2. Rotary engines combustion chamber = rotor housing not cylinders as in a conventional piston engine.
3. The question of the correct spark plug being used should not have been an issue.
|
__________________
Supercharged or Turbocharged, Boost is Boost
Big Body on 335's!!!!!
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
