turbo 2

[ebeza]

im about to buy a 88 turbo 2 it has an idle problem engine starts up fine sounds good and no smoke. the rmp goes from 1000-1500 like it has a vaccum leak. i was wondering if it is that or if its something more serious? please help. and thanks for all the help i can get.

[LunchboxCritter]

Sounds like a vacuum leak, tps needs adjusting/replacing, or even a bad seal. I would say if it passes a compression test then it should be a fairly simple and fairly inexpensive repair.

BTW: The car should idle at 850 rpm.

[mbonner]

What shoukld be the compression figures for an 88 Vert, n/a motor? I have finally rigged up a compression tester for the rotary motor, but I forgot the acceptable numbers for a compression test,
Thanks,
mikey

[LunchboxCritter]

It should be close to 100 psi or more on each face of both rotors. It is important that all 3 bounces on the tester be fairly equal. 80 psi and you need to consider a rebuild. Test at operating temp.