Rx7 Forum and Owners Club - View Single Post

LunchboxCritter · 09-07-2011, 11:20 PM

It should be close to 100 psi or more on each face of both rotors. It is important that all 3 bounces on the tester be fairly equal. 80 psi and you need to consider a rebuild. Test at operating temp.

09-07-2011, 11:20 PM	#4
LunchboxCritter Junior Member Join Date: May 2010 Age: 47 Posts: 22	It should be close to 100 psi or more on each face of both rotors. It is important that all 3 bounces on the tester be fairly equal. 80 psi and you need to consider a rebuild. Test at operating temp.