Rx7 Forum and Owners Club - View Single Post - Maf conversion using standalone such as AEM?

Timdog1650 · 08-30-2005, 11:51 PM

Anyone do it? You could get a universal box and spend some time hooking up the stock harness to that...then use a maf setup to get better fuel mileage. It would seem that putting the car in closed loop for crusing/driving around town would bump up your fuel mileage significantly.

For the FD, I could be retarded though, they all use MAP based ECU's in stock form, right?

Just curious....since most modern cars get better mileage with a closed/open loop system based on a maf.

Thanks,
~Tim

08-30-2005, 11:51 PM	#1
Timdog1650 Junior Member Join Date: Aug 2005 Location: Annapolis, MD Posts: 5	Maf conversion using standalone such as AEM? Anyone do it? You could get a universal box and spend some time hooking up the stock harness to that...then use a maf setup to get better fuel mileage. It would seem that putting the car in closed loop for crusing/driving around town would bump up your fuel mileage significantly. For the FD, I could be retarded though, they all use MAP based ECU's in stock form, right? Just curious....since most modern cars get better mileage with a closed/open loop system based on a maf. Thanks, ~Tim
	__________________ Former 400whp WRX/STi frankenstein.