removing vac lines and tt setup at the same time

[Psycho_Dad]

ok guys i got this lil cav diagram, and all the salenoid valves and stuff are listed... im going to be running a microtech ecu or somthing.... before i replace em all with silicone, i was just wondering how many of these lil valves would be needed for a single turbo setup
er would i need the solenoid valves for....

preassure regulator
secondary b****((the picture is cut off, cant read all of it)
secondary air s*****
egr
turbo control
charge control
double throttle
charge relief
wastegate control
turbo precontrol
purge control

im sure someone here whos a pro would be able to answer this, and it would be appreciated before i waste this silicont hose


thanks guys

Psycho_Dad :)

[Psycho_Dad]

sorry guys posted in the wrong place i was in a rush can someone please move it to tech for me?

cheers

Psycho_Dad

[black rocket]

Basically, you want to remove ACV and all of them valves and lines and lines and lines (sry carried away), right? You'll want to keep pressure regulator.

[Psycho_Dad]

lol so ditch everything apart form the preassure regulator? seriouslly is 70% of those lines not needed to have a reliable single turbo 13brew?

if this is correct then COOL

when it comes to engines, or any mechanical device, i allways have to refer back to "keep it simple stupid"

Thanks dude,

any other words of wisdom? i have read the stuff on replacing vac lines on 13b rew's

Psycho_Dad

[black rocket]

I'm in the process of removing them rats nest myself...

Where are you gonna get hoses from? I got referred to Hose Techinique for its excellent products.

I bought my hoses from them. It withstands 500degrees compared to 300 degrees tolerance of most other silicone hoses and that just makes me little more comfortable.

[Psycho_Dad]

uhh im using HTS silicone hose, supposedly 500 degrees farinsumthing(my spelling sucks)
if i post you a jpg of a hosing dieagram wanna remove what your removing? are you running a single turbo setup too?
if so what sorta torbo are you using black?

cheers
Psycho_Dad

[black rocket]

T04R..

Yeah...email me the diagram and it'll be great!

[Psycho_Dad]

dude that email would soo be at your doorstep if i could loc you email addy?? lil bit a help here, pm me it if you wanna play it 007 styles

you know secret squirrel?

*end of transmission*

cheers
Pscyho_Dad

[Canaduh]

Are you going to go single turbo psycho_dad?

[Psycho_Dad]

damn skippy im going single turbo! im kinda a enemy of the seq setup, twice the turbos, 4 times the complexity, twice the chance of stuffing somthing up

keeping in mind that i got the engine without the 2 turbos, and the car needs a completely custom manifold made anyway since its not setup for a 13b turbo(chevron/lotus 7 replica)

on that note can rotaries run antilag?

i hope so

cheers
Psycho_Dad

ps: custom made 500hp t04e turbo is costing me about USD$550, brand spanking, sound right?

[Canaduh]

Single turbo will also cost you more, you know that right?

That's a good deal on the turbo! I was going to say i can get you one for 620$USD but yours is obviosuly better! Good luck!

[Psycho_Dad]

admittedly, it does cost more, including the fact that i have to get a custom made manifold so that the turbo will fit... i have to get a new ecu, and a bigger fuel pump.... better intercooler, and heaps of custom alloy ducting, might have to get bigger injectors..... but look around, whats the point in being average, just like everyone else??? no money must be spent, when i revamp my diff ratios i must be able to wheelspin in 4th... im not here for looks, im here to run circles around anyone who dreams them selves worthy..... and with a power to weight ratio of 2hp for every 3kgs, i think i will get their

untill i take on a hiyabusa or another form of turbod motorbike

wait and see, about 4 months to go

cheers
Pscyho_Dad

[Canaduh]

but look around, whats the point in being average, just like everyone else??? no money must be spent, when i revamp my diff ratios i must be able to wheelspin in 4th... im not here for looks, im here to run circles around anyone who dreams them selves worthy.....

Words of wisdom. Or insanity...=D I hope my car spins at 4th, :)

[Psycho_Dad]

if you would like words of wisdom, "keep it safe, if you cant keep it safe, keep it clean, and if you cant keep it clean, dont name it after me"

oh yeah and "if your in control, your obviously not going fast enough"

then theirs all the words of wisdom of fightclub, but im sure most of the poeple here have seen that movie enough to not need me to go through it again

cheers
Psycho_Dad

rememer, insanity was invented for the masses, not the insane, which side do you want to be on?

[Canaduh]

That movie is awesome.
"im sorry i had to destroy something beautiful"
:)

[black rocket]

Getting little poetic here...hehe

[Canaduh]

poetic in a car forum...Who woulda thought. And not just any cars :)

[Psycho_Dad]

mentioning poetry, this stuff could get serious

rotary rotary rotary
throbbing....... Smile

[Canaduh]

hahahaha

[black rocket]

Roses are red...violets are blue...

OK, it's your turn! LOL

[Canaduh]

Roses are red...violets are blue...

OK, it's your turn! LOL

Okay, ill finish that one.

roses are red, violets are blue, I like rex's AND YOU BETTER TOO :twisted: :twisted: :twisted:

[Psycho_Dad]

so anyway, i have been led to drinkingtoo much, then working on my engine, its kinda fun, hope i dont screw up somthing,

removing boost controller stuff atm, wait and see whats next

cheers
Psycho_Dad

[black rocket]

Yes, it does drive you to drink when you're working on rotary :/

And I don't even drink much or often.

[Canaduh]

You alky's!

[Psycho_Dad]

ok my thoughts... maybe i should remove ALL the vac lines, solenoids ETC and get a fm preassure reg and just run it like that

is their anything id be missing that would be requited to run the setup?

cheers

Psycho_Dad

[black rocket]

Hmmm. I'd say yes... Wish you luck!